Ricon 70-100 Manuel de l'opérateur

70-100www.rikontools.com70-100M412” x 16” Mini LatheOperator’s ManualRecord the serial number and date of purchase in your manual for future reference

10ASSEMBLYInstall The Spindle LockLocate the spindle lock assembly from the carton, and install it onto the head with an adjustable wrench. FIG. 5.Wa

11ASSEMBLYSecure The Lathe to a Solid Work SurfaceThe lathe must be attached to a solid work surface or stand. Four mounting holes are easily accessib

12ADJUSTMENTSAdjusting the TailstockLoosen the locking lever to move the tailstock along the lathe bed to desired position for holding your work piece

13ADJUSTMENTSFIG. 17The lathe can also be set up for a faceplate turning operation. The work piece should be “rough cut” as close as possible to the 

14ADJUSTMENTSIndexing / Using the Spindle LockThe Headstock Spindle has 12 indexing holes, each 30° apart, which allows accurate pattern work on proje

ACCESSORIES1870-900 24” LATHE BED EXTENSION Made of heavy cast iron, it bolts to the right end of the 70-100 Mini Lathe to extend the lathe’s worki

16MAINTENANCE1. Before each use:- Check the power cord and plug for any wear or damage.- Check for any loose screws, hardware, locking handles, jig

TROUBLESHOOTING17For parts or technical questions contact: [email protected] or 877-884-5167.PROBLEMPROBABLE CAUSEREMEDY 1. Work piece is war

18PARTS DIAGRAMNOTE: Please reference the Key Number when calling for Replacement Parts. For Parts under Warranty, the Serial Number of your machine i

PARTS LISTKEY NO. DESCRIPTION PART NO.1A345677A8910111213A14161717A2122232424A2526272830A31A32A33A343536374040A40B40C40D40E414244A454647

2TABLE OF CONTENTSSPECIFICATIONSNOTE: The specications, photographs, drawings and information in this manual represent the current model when the man

www.rikontools.com70-100M470-100For more information:16 Progress RoadBillerica, MA 01821877-884-5167 / [email protected]

3SAFETY SYMBOLSIMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following instructions must be fol

4SAFETY INSTRUCTIONS 16. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch to the “OFF” p

5SAFETY INSTRUCTIONS THE USE OF AN EXTENSION CORD WITH THIS MACHINE IS NOT RECOMMENDED. For best power and safety, pl

6SAFETY INSTRUCTIONSCALIFORNIA PROPOSITION 65 WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activiti

GETTING TO KNOW YOUR MACHINECONTENTS OF PACKAGE7Model 70-100 Mini Lathe is shipped complete in one box.Unpacking and Clean-up1. Carefully remove all

CONTENTS OF PACKAGEINSTALLATIONTools Required for Assembly Phillips Screwdriver70-100www.rikontools.com12” x 16” Mini Lath

9ASSEMBLY THE MACHINE MUST NOT BE PLUGGED IN AND THE POWER SWITCH MUST BE IN THE 'OFF' POSITION UNTIL ASSEMBLY I